SOLARO XIO 8

XILICA SOLARO XIO 8 – a multi-channel Dante interface converter built on the 8-slot chassis platform of the XILICA SOLARO family. The model provides 4×4 channels for the Dante audio network and is equipped with eight slots for installing input/output modules. In addition to analog and digital audio modules, the chassis allows for the installation and configuration of GPIO and relay modules, enabling the transmission of not only audio data but also control signals over IP networks. Control is managed via the Xilica Designer software; signal processing is not available for XIO models, however, the input and output modules can be configured according to their functionality, for example, control of phantom power, sensitivity level, etc.
The device is housed in a compact 1RU high enclosure and can be installed in a standard 19″ rack. The front panel is equipped with status indicators, a connector for an external power supply, an RJ45 Ethernet port, and an RJ45 Dante interface port. The device supports PoE and can be powered directly from a PoE Ethernet switch.

Number of slots: 8
Processor: 40-bit floating point
Sampling frequency: 48 kHz
Introduced delay: 4 ms
Interface connectors: RJ45 Ethernet (PoE), RJ45 Dante
Power supply: 12 V, 2 A DC
PoE: IEEE 802.3af, Class 0
Dimensions: 108 × 44 × 152 mm
Weight: 1 kg

8 slots for expansion cards / 4×4 Dante channels by default

+12 VDC / 2 A external power supply or PoE (Power over Ethernet)

+12 VDC / 2 A external power supply or PoE (Power over Ethernet)

44 BTU/hr (Heat dissipation)

Control via Ethernet (Xilica Designer software), 40-bit floating point processor